floor screeding contractor

Tel. 01909 489915

Tarmac Cemscreed

We are proud to announce that we are licensed installers of Tarmac Cemscreed. Cemscreed is an enhanced binder that allows finishes to be applied early. The premium for this product is small in comparison to other manufacturers.

Underfloor Heating Supplies

ADH Flooring Ltd have recently secured Underfloor Heating supplies from Reliance Water Controls Ltd - one of the UK’s leading UFH manufacturers.

Feedback

The feedback we get from our customers and clients, though always very positive, helps us to improve the work we do. Because every bit of work we do is treated as though it was done at our own home, we always do a top quality job. Our customers are always very happy with the resulting floor. We get feedback, through our customers, from tilers, joiners and kitchen fitters who say they can’t believe how good the screed is and it is the best they’ve seen. It is true we do a top quality job, but we accept that there are other top quality floor screeders that also do a quality job. However not all companies will do such a quality job.

RELIANCE MANA 450 512   - 12 port manifold and blending kit

RELIANCE MANA 450 502   - 2 port manifold and blending kit

RELIANCE UFHC 970 302 Mixer / Blender with A Rated Grundfos Pump

Pert-Al-Pert 16mm Pipe

Pert-Al-Pert

Site last updated 23 June 2013

[ADHF] [About Us] [Services] [Floor Screed products] [FAQ Screeding] [Sales] [Sales Underfloor Heating] [Gallery] [Jobs Done]

Floor Screeding & Underfloor Heating Services

At ADH Flooring Ltd we try our best to give the customer the best service that we can. We will endeavor to find the most cost-effective product to achieve the floor screed that you need. We will always include polypropylene fibres in the mix. Our accuracy to detail is extremely high. The surface regularity is always at the best end of any standard scale and doesn’t come any better as our SR level is always at SR1* when checked. Our compaction rate is very high as we use a more compaction oriented technique than most other floor screeders. The finish we achieve is very tight as our compaction is high we don’t have any sinking and we powerfloat our screeds in large areas.

*SR1 exceeds the regularity that is normally achieved using a flowing screed.

Underfloor heating is very convenient and efficient in modern homes, especially in kitchens and Conservatories. Many homes are suitable to be changed to underfloor heating i.e. if the floor is made up of floor boards on timber joists on the ground floor. If the building is built on footings with a substrate concrete slab laid between walls, this may still be suitable, but hard work is going to be involved. Some old buildings floor build up is tile on sand, which is possibly the easiest to convert to underfloor heating.

Alternatively, if there is sufficient height, it may be possible to build up an underfloor heated system on top of existing floors.

We are able to offer these conversion services, together with a damp-proofing and insulation.

Please email antony@adhf.co.uk for costs

ADH Flooring Ltd install, insulation, underfloor heating systems, floor screed and final floor finishes. If your property is a new build house we charge VAT at 0%. So if we supply & install your underfloor heating system & screed, we can deliver, your electronic controls at the best price with no VAT.

www.underfloorheatingcontrol.co.uk is our online shop where you can buy top quality ranges of underfloor heating products at the best prices we can find online. 

First fixing for Underfloor heating control systems.

There are three main types of thermostat for UFHS.

220v - 240v hard-wired mains, 12v hard-wired network and wireless network.

If you are building a home from new or fully renovating a building you would be best using a wired system. To have a future-proof system, you may find it useful to install 4-core+earth plus an 8-core Cat5 cable to every point where a thermostat, or controller, is to be placed, terminating at the point where the wiring centre is to be housed (keep very close to UFHS manifold for the actuators). This way you still have the option to use a 12v network system or 240v mains system.

If you are installing underfloor heating in an extension, you may find it more practical to use a wireless system. These use a battery powered thermostat to control a receiver or wireless enabled wiring centre such as the Heatmiser UH1-W.

A 240v hard-wired mains system can use WiFi so that the timer and thermostats can be controlled / viewed by using a PC web browser or iPhone/iPod/iPad/Smartphone App. Click the links to the right to download Apps for free.

Floor Screeding Contractor for Derbyshire Screeding Leicestershire Screeding Lincolnshire Screeding Nottinghamshire Screeding Yorkshire Screeding UK Screeding Derbyshire screed Leicestershire Screed Lincolnshire Screed Nottinghamshire Screed Yorkshire Screed UK Screed Barnsley Screeding Chesterfield Screeding Derby Screeding Doncaster Screeding Grantham Screeding Hull Screeding Leicester Screeding Lincoln Screeding Mansfield Screeding Newark Screeding Nottingham Screeding Retford Screeding Rotherham Screeding Sheffield Screeding Wakefield Screeding Worksop Screeding Underfloor Heating Under floor Heatmiser

contact@adhf.co.uk

Tel. 01909 489915

Complete Underfloor Heating and Floor Screeding Package for 100m2. Inclusive of 7 port Chrome manifold, 500m of 16mm Pert-Al-Pert pipe, 7x Watts Actuators, 6x Heatmiser PRT programmable LCD room thermostats, Heatmiser UH3 wiring centre and 75mm of traditional fibre-screed done to the highest standard, within 150 miles of Worksop, Nottinghamshire for:- 

£3,375.00 + VAT for PRT

£3,450.00 + VAT for PRT-TS

£3,750.00 + VAT for PRT-TS WiFi

See below:-

PRT Programmable Room Thermostat.            Click image to go to our online shop

£ 37.50 + VAT

PRT-TS Touchscreen Programmable Room Thermostat. Click image to go to our online shop

£ 55.00 + VAT

PRT-TS WiFi Touchscreen Programmable Thermostat for iPod/iPad/iPhone control.   Click image to go to our online shop

£ 109.00 + VAT